Guys, my husband gave me the best Christmas present!! SHIPLAP…oh, finally!! It’s the gift that keeps on giving. Well, it’s actually a faux shiplap wall, but it looks just as great and for way cheaper. I admit, I’ve been a total nag about it. He finally realized I wasn’t giving up and bought everything he was going to need this year on black Friday. He’s my favorite! I knew I wanted it in my home in a few places, and I thought the best place to start was in a hallway that connects our living room to our kitchen. We decided to go with a planked wall instead of real shiplap. Here are a few reasons why we went with planked vs. shiplap.
- It’s thinner than shiplap (We didn’t want to remove the crown molding on the top and bottom of our wall)
- It’s cheaper than shiplap ($13.50 x 3)
- It was super simple to install
So, let’s get to it. I tried to document every step of the way to make it an easy tutorial to follow. Here is what you need.
- Circular Saw- to cut the boards to length
- Nail Gun and Nails
- Jigsaw- to cut around edges and outlets
- Hand Sander
- Stud Finder
- Wall Paint
- 4X8 Underlayment
- Trim for edges
After you have all of the basic tools you need, then the fun part begins. Head to your preferred home improvement store and get your wood. We bought 3 sheets of 4×8 underlayment from Home Depot. This is what it looks like.
The best part is the price! Only $13.49 per sheet. SO CHEAP!!!
Next, you need to decide on the size of your planks. We went with 8″ planks. 6″ or 8″ is pretty standard, but I really liked the look of thicker planks. You can even have the store cut them for you. It was way easier for them to run it through their machine, but that is totally up to you.
Here it is all cut and ready to go up. One pretty important step that we did when we got home was sanding the cut edges. Since it is a thin wood, the cuts that were made were just a little bit rough so we just went along the edges with a hand sander and sanded it down. It didn’t take that long, and I highly recommend doing that so you don’t have rough edges.
Before your planks start going up, you need to find your studs. We just went along the wall and marked where our studs were. Then, we drew a line all the way down to make it easy to know where to nail them in the wall.
After you have everything marked, then you are ready to go.
Note: We started at the top because we knew it wasn’t going to measure out perfectly and we wanted our smaller piece to be at the bottom instead of the top. You can do it either way. It’s really is just what your prefer.
We used a few nickels to space them out. You can used nickels or spacers but this step is VERY important. If you don’t space them out enough, then you will not get the planked look that you are going for.
After you get going it actually goes pretty fast. The most difficult part of this project is cutting around the top of the door frame and around the plugs using your jigsaw.
Ok, are you still with me? This part isn’t very fun but very necessary. Go around with your putty and fill in all the nail holes. UGH, I know. If you have help it goes pretty fast. It only takes a little bit of spackle so don’t go crazy. We let it dry for an hour or so and then sanded it down.
Primer is next. We primed the planks with Zinsser white primer.
After they were primed, all was left was paint. I chose White Dover by Benjamin Moore.
Note: You can give Home Depot or Lowes your preferred paint color and number and they can match it with their paint. They can search and match almost any color. We used the color White Dover but with Behr paint.
I am so in LOVE! It brightened up my hallway so much and gave it that farmhouse look that I love so much!!
Well guys, I hope this tutorial helped motivate you to add a little farmhouse charm to your home. It really was a pretty easy project. I’m already ready for more. Let me know what you think and feel free to ask me any questions you might have! Thanks so much for stopping by!!